ITALIANO

CRUSYACHT - TRUC 12th

 
 

The reinvention of tradition: the smallest yacht is born: TRUC 12th

Truc 12Day-boat o Toy-boat

A dinghy with the ambitions and the characteristics of yacht that is ideal for who approaches sailing without wanting to give up the exclusiveness of aesthetics and stile. Ideal as a day-boat, it is easy to transport even on the roof of a mid-sized car, great as a tender boarded on a megayacht, it is easily winched in the water with a crane thanks to bespoke hooks.

Easy

A modernly designed carena, with very stiff lines that enhance performances and stability, with a strong attitude to surfing making it a boat characterised by simplicity and fun. The mast in carbon and the lightest of sails exalt its key features of stability and safety, allowing great performances with extreme ease.

Truc 12Beauty

The bottom of the cockpit covered in teak, the exclusive benches in wood and the high standard of finishings make this boat unique in its genre, able to join tradition and modernity in a very stilish balance.
The design characterized by sweet and clean lines make its beauty unquestionable...

Tradicional and reliable construction

The boats are built in Italy with experience and workmanship by Cantieri NORDEST, specialist gives beyond twenty years under construction technologically advanced. The hull is realized in glass-reinforced plastic with resin polyester, sturdy and long-lasting it is of easy mantainance and repair.

Valuable woods for the deck

The bottom of the cockpit that acts as buoyancy reservoir, is made out of a panel purposely manufactured for being employed in nautical enviroments. This is then covered with thin clep board of valuable teak with black rubber that constitute an optimal anti-slide bottom. The benches in wood are glued and covered with epoxy resin and refined with transparent varnishes that also guarantee a good protection from the sun.

Truc 12NACA profile for rudder and centerboard

Centerboard and rudder, obtained from a stamp and made in glass-reinforced plastic, are designed to reduce resistance and introduce two efficient NACA profiles which are of aeronautical derivation. The centerboard is retractable, while the rudder takes advantage of an ingenious mechanism which lifts it and keeps it raised through a simple movement of the bar.

Quality and easy fittings

Quality and efficiency are assured thanks to reliable and well placed on-board equipment made by HARKEN.
Maneuvers are reduced to minimum in order to achieve extreme ease of use and guarantee the most fun with the least hassle.

Truc 12 Truc 12 

Extremely advanced rigging

Born from the continuous research and studies carried out in close cooperation with CHALLENGER SAILS, market leader in the wind-surfing industry, the rigging turns out to be a concentrate of technology and innovation that places it at the forefront of the sector.
All the tubes, including the boom, are made in carbon fiber, while the full-batten main sail has unrivalled characteristics of modern shape and lightness. An extremely advanced rigging that satisfies the extreme qualitative requirements of our yachts.

100% carbon mast

Developed in cooperation with CHALLENGER SAILS, the mast 100% in hight module carbon fiber, in order to guarantee exceptional resistance and lightness. The innovative characteristic is that of being realized in three detatchable parts, the smallest of which acts as an extra variable extension in order to adapt the mast to two different sail formats.
Once taken apart and stored in the same bag as the sails, it facilitates transport and storage, whilst the extraordinary lightness and practicality of the insertions allow an extremely easy assembly which can be achieved by almost anyone.

Cool Wing 6.8

Designed for being the standard sail, it covers a wide range of wind intensities and satisfies most sailors' abilities and requirements. The balanced distribution of the surface and the adoption of full lenght-batten with tension regulators, allow exceptional performances and a remarkable facility of use, while the PENTEX utilised by CHALLENGER SAILS, guarantees the highest level of quality as well as a dramatic weight reduction.

Soft Wing 5.8

Conceived for lightest or less experienced sailors, it is above all the ideal sail to achieve a great feeling and consistent surfing when the wind picks up. The modern cut and the low position of the centre of thrust guarantee an exceptional relation between efficiency and simplicity of use. Realized in PENTEX with the highest standard of quality and with finishings from CHALLENGER SAILS, it is full-batten with tension regulators and radial reinforcements in line with the points of stress.

Length hull 3.65 m
Width hull 1.37 m
Weight hull 56±2kg
Sailing area cool wing 6.8 6.8 mq
Sailing area cool wing 5.8 5.8 mq
Material of construction GRP+wood (with howen post-cooking)
Material of construction spar + boom Carbon fiber
Design Marco Croci
Builder Crusyacht
Category CE D
Persons on-board max 2

Truc 12Hull white/grafite black
Cockpit covered in teak
Benches in mahogany wood
Rudder and centerboard white/grafite black
Rudder’s stick in mahogany wood
Rudder’s mechanism in steel inox
Vang HARKEN series MICRO and sheet of 4mm
Cunningam HARKEN series MICRO and sheet of 4mm
Main sail’s foot HARKEN series MICRO and sheet of 4mm
Boom sheet HARKEN series CARBO and sheet of 8mm
Detatchable spar and boom in carbon fiber
Main-sail cool wing 6.8 in PENTEX black borded
We sell the boat equiped as above described. Contact us!

Accessories:
personalized color
cloth boat cover
undercarriage
Soft Wing 5.8 sail
Sport Wing 7.8 sail

Download brochure (PDF 756kb)
Download brochure carrellino + vele (PDF 585kb)

 BARRA CARB Crusyacht
Marco Croci, l'architetto della Truc 12th, e Denis Coner

For more info visit the web site: www.crusyacht.it


 
   Cantieri NORDEST s.n.c. - Via Chiodo 14/F, 36050 Bolzano Vicentino (VI) ITALY
   Tel. 0444 351188 - Fax +39 0444 350667 - VAT: IT01272800242 - Email: info@cantierinordest.com